SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions 9
3. Insert the tab on the clamping bar into the corresponding slot in the bracket cradle
and rotate the clamping bar into place as shown in Figure 8. Ensure that the screw
hole in the clamping bar lines up with the screw hole in the bracket cradle.
Secure the clamping bar to the bracket cradle with a Phillips-head screw.
-"(
clamping bar
SCSI cable
back of computer
tab
SCSI host adapter
bracket
cradle
Phillips-head
screw
To Next Page
Loading...
