Troubleshooting Your System 161
• VFlash media cards
• USB memory keys
• NIC hardware key
• Expansion-card riser
• Integrated storage controller card
•iDRAC6 Express card
•iDRAC6 Enterprise card
• Power supplies
•Fans
• Processors and heat sinks
•Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 85.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 187.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 113.
9
Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 177.
If the tests fail, see "Getting Help" on page 187.
book.book Page 161 Tuesday, August 24, 2010 1:47 PM
To Next Page
Loading...
