Figure 56. 2.5 Inch (x4) SAS/SATA Backplane—Back view
1. backplane power cable 2. system board miscellaneous signal cable
Figure 57. Removing and Installing the 2.5 Inch (x24) SAS/SATA Backplane
1. release tab (2) 2. backplane jumper connector
3. backplane jumper connector for the expander
daughter card
4. backplane power cable
5. SAS connector 6. hard drive connector
7. backplane hook (8) 8. backplane power cable
103
To Next Page
Loading...
