Do you have a question about the Dell PowerEdge R200 and is the answer not in the manual?
Tcase | 72.4 °C |
---|---|
Bus type | FSB |
Stepping | C0 |
FSB Parity | No |
Processor code | SLAPM |
Processor cache | 6 MB |
Processor cores | 2 |
Processor model | E3110 |
System bus rate | - GT/s |
Processor series | Intel Xeon 3100 Series |
Processor socket | LGA 775 (Socket T) |
Processor codename | Wolfdale |
Execute Disable Bit | Yes |
Motherboard chipset | Intel® 3200 |
Processing Die size | 107 mm² |
Processor frequency | 3 GHz |
Processor cache type | L2 |
Processor lithography | 45 nm |
Processor system type | Up |
Processor manufacturer | Intel |
Processor package size | 37.5 x 37.5 mm |
Processor front side bus | 1333 MHz |
Processor operating modes | 64-bit |
Thermal Design Power (TDP) | 65 W |
Processor core voltage (AC) | 1.225 - 0.956 V |
Number of processors installed | 1 |
CPU multiplier (bus/core ratio) | 9 |
Number of Processing Die Transistors | 410 M |
HDD capacity | 750 GB |
HDD interface | Serial ATA |
Total storage capacity | 1500 GB |
Internal memory | 2 GB |
Internal memory type | DDR2-SDRAM |
Memory layout (slots x size) | 2 x 1 GB |
Maximum graphics card memory | 32 MB |
Drive bays | 2 x 3.5” SATA/SAS |
Graphics card | ES1000 |
USB 2.0 ports quantity | 4 |
Ethernet LAN (RJ-45) ports | 0 |
PCI Express x8 slots | 3 |
Bundled software | OpenManage |
Chassis type | Rack (1U) |
Storage temperature (T-T) | -40 - 65 °C |
Operating temperature (T-T) | 10 - 35 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 20 - 80 % |
Processor ARK ID | 34694 |
Depth | 5431 mm |
---|---|
Width | 4470 mm |
Height | 427 mm |
Lists system messages, their causes, and corrective actions for troubleshooting.
Lists and describes various configuration options available within the System Setup program.
Details features for setting up system and setup passwords for data security.
Details guidelines and procedures for installing and removing system memory modules.
Instructions for replacing the system's processor and heat sink.
Offers solutions for faulty memory modules or incorrect memory configurations.
Addresses hard drive errors and issues with drives not being recognized by the system.
Provides instructions on how to disable system passwords using a jumper.