Need help?Do you have a question about the Dell EMC PowerEdge R250 and is the answer not in the manual?
General| Processor cache | 12 MB |
|---|---|
| Processor model | E-2336 |
| Execute Disable Bit | Yes |
| Processor frequency | 2.9 GHz |
| Processor manufacturer | Intel |
| Processor boost frequency | 4.8 GHz |
| Embedded options available | No |
| Number of processors installed | 1 |
| On-board graphics card | - |
| Memory slots | 4x DIMM |
| Internal memory | 16 GB |
| Buffered memory type | Unregistered (unbuffered) |
| Internal memory type | DDR4-SDRAM |
| Maximum internal memory | 128 GB |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet interface type | Gigabit Ethernet |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 2 |
| Chassis type | Rack (2U) |
| Product color | Black |
| Compatible operating systems | Canonical® Ubuntu® Server LTS Citrix® Hypervisor Microsoft® Windows Server® with Hyper-V RedHat® Enterprise Linux SUSE® Linux Enterprise Server VMware® ESXi® |
| HDD size | 3.5 \ |
| HDD speed | 7200 RPM |
| RAID levels | 0, 1, 10 |
| HDD interface | SATA III |
| Total storage capacity | 2000 GB |
| Maximum storage capacity | - TB |
| Number of HDDs supported | 4 |
| Supported RAID controllers | PERC H345 |
| Power supply | 450 W |
| Power cable length | 3 m |
| Power cable current | 15 A |
| Power cable connector 1 | C13 coupler |
| Power supply input voltage | 125 V |
| Data transfer rate | 6 Gbit/s |
Weight and Dimensions| Depth | - mm |
|---|---|
| Width | 482 mm |
| Height | 42.8 mm |
| Weight | 12480 g |
Identifies external components and ports on the front of the server.
Details external components and ports on the rear of the server.
Provides an overview of internal components and their locations within the chassis.
Explains the location and content of the system information label for identification.
Information on selecting and installing appropriate rail kits for rack mounting.
Guide to finding the unique service tag for system identification and support.
Basic steps for unpacking, installing, and powering on the server for initial setup.
Overview of configuring the Integrated Dell Remote Access Controller (iDRAC) for remote management.
Methods for configuring the network settings for iDRAC communication.
Procedures for accessing the iDRAC Web User Interface for management.
Lists available resources and documentation for installing the OS.
Details methods for downloading system firmware from Dell support.
Outlines options for obtaining and installing necessary operating system drivers.
Step-by-step guide for downloading drivers and firmware from the Dell support site.
Specifies the essential components required for the system to power on and initialize.
Explains the process of checking system configuration against qualified standards.
Lists and explains common error messages encountered during system startup and operation.
Crucial safety guidelines to follow before performing any internal system operations.
Prerequisites and steps to take before opening the system for maintenance.
Procedures to follow after completing internal system maintenance.
Lists the necessary tools for performing component removal and installation.
Procedures for removing and installing the optional front bezel.
Instructions for removing and installing the main system cover.
Steps for removing and installing an optional optical drive.
Guide to removing and installing the system's air shroud for cooling.
Procedures for removing and installing system cooling fans.
Steps for removing and installing the chassis intrusion switch module.
Information on supported backplane options and their removal/installation.
Procedures for removing and installing various types of drives and drive carriers.
Diagrams and descriptions for connecting internal cables for different drive configurations.
Guidelines and procedures for installing and removing system memory modules (DIMMs).
Instructions for removing and installing the CPU processor and its associated heat sink.
Information on installing and removing expansion cards and their riser configurations.
Instructions for removing and installing PERC adapter cards.
Steps for replacing the system's coin-cell battery.
Instructions for removing and installing the system's power supply unit.
Procedures for removing and installing the main system board.
Information and procedures for removing and installing the Trusted Platform Module (TPM).
Procedures for removing and installing the left and right control panels.
Identifies and describes various connectors on the system board.
Details the functions and settings of system board jumpers.
Steps to clear system or setup passwords using a jumper.
Explains the status indicators on the power supply unit.
Guide to running system diagnostics for troubleshooting hardware issues.
Information on using Dell's pre-boot system assessment tools for diagnostics.
Information on product recycling and disposal services worldwide.
How to obtain technical assistance, sales, or customer service from Dell.
Using QR codes to access online resources and system information.
Benefits and features of Dell's automated support service.
To Next Page