EasyManua.ls Logo

Dell EMC PowerEdge R750xs Service Manual

Dell EMC PowerEdge R750xs
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Dell EMC PowerEdge R750xs
Installation and Service Manual
Part Number: E75S Series
Regulatory Type: E75S001
July 2021
Rev. A00

Table of Contents

Other manuals for Dell EMC PowerEdge R750xs

Question and Answer IconNeed help?

Do you have a question about the Dell EMC PowerEdge R750xs and is the answer not in the manual?

Dell EMC PowerEdge R750xs Specifications

General IconGeneral
ManagementiDRAC9 with Lifecycle Controller
ProcessorUp to two 3rd Generation Intel Xeon Scalable processors, with up to 32 cores per processor
MemoryUp to 1TB DDR4 at 3200MT/s; 16 DIMM slots
StorageUp to 12 x 3.5" drives (SAS/SATA/NVMe)
RAID SupportH355
Power Supply800W, 1100W, 1400W Platinum
NetworkOCP 3.0 Network Daughter Card options, up to 2x 25GbE
Form Factor2U rack
DimensionsHeight: 86.8 mm (3.41 inches), Width: 482.0 mm (18.98 inches)
Expansion SlotsUp to 5 PCIe Gen4 slots
GPU SupportSupports up to 2 single-width GPUs
Operating System SupportCanonical Ubuntu Server LTS, Red Hat Enterprise Linux, SUSE Linux Enterprise Server

Summary

PowerEdge R750xs system overview

Inside the system

Illustrates and labels internal system components.

Initial system setup and configuration

Setting up the system

Step-by-step guide for initial system setup.

iDRAC configuration

Information and steps for configuring iDRAC.

Downloading drivers and firmware

Step-by-step guide for downloading drivers and firmware from Dell.

Minimum to POST and system management configuration validation

Configuration validation

Explains system configuration validation process and error reporting.

Installing and removing system components

Safety and Preparation

Safety instructions, prerequisites, and recommended tools for system servicing.

System memory

Guidelines and procedures for system memory installation.

Processor and heat sink module

Procedures for removing and installing processor and heat sink.

PERC

Procedures for installing and removing PERC adapters and modules.

Power supply unit

Information and procedures for power supply units and hot spare feature.

System board

Procedures for removing and installing the system board.

System diagnostics and indicator codes

Using System Diagnostics

Guides on running system diagnostics for hardware testing.

Related product manuals