5. Expansion card riser 6. Processor heat sink
7. System board 8. Cooling fans
9. Information tag
Figure 6. Inside view of the cabled drive system
1.
Optical drive 2. Cabled drive connector
3. Intrusion switch 4. Cabled power supply unit
5. Expansion card riser 6. Processor heat sink
7. System board 8. Cooling fans
9. Information tag
System information label
The system information label is located on the back of the system cover.
Figure 7. Express service tag
10
PowerEdge R250 system overview
To Next Page
Loading...
