Need help?Do you have a question about the Dell EMC PowerEdge R240 and is the answer not in the manual?
General| Processor Sockets | 1 |
|---|---|
| Memory | Up to 64GB DDR4 ECC UDIMM |
| Memory Slots | 4 |
| Chipset | Intel C246 |
| Form Factor | 1U Rack |
| Processor | Intel Xeon E-2100 |
| Storage | Up to 4 x 3.5" SAS/SATA (HDD/SSD) or 2.5" SAS/SATA (HDD/SSD) |
| RAID Support | PERC H330 |
| Network Interface | 2 x 1GbE LOM |
| Power Supply | 350W |
| Operating System | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi |
| Management | iDRAC9 |
| Memory Speed | 2666 MT/s |
| Maximum internal storage | Up to 48TB (with 12TB drives) |
Provides a comprehensive overview of the PowerEdge R240 server's hardware and features.
Details the components and indicators visible on the front panel of the server.
Describes the left and right control panels, including buttons and status indicators.
Explains how to find the system's Service Tag and Express Service Code for identification.
Outlines the essential steps for physically installing and preparing the server.
Covers the setup and configuration of the Integrated Dell Remote Access Controller (iDRAC).
Lists resources and methods for installing a supported operating system.
Details various methods for obtaining system firmware and device drivers.
Explains how to access and utilize the System Setup utility for BIOS and device configuration.
Details the various configuration options within the System BIOS, including memory, processor, and boot settings.
Explains how to configure the system's boot mode, sequence, and boot devices.
Covers setting up system passwords, security features, and Trusted Platform Module (TPM) configuration.
Describes the interface for setting up and configuring iDRAC parameters via UEFI.
Provides essential safety guidelines before performing component maintenance or replacement.
Step-by-step instructions for safely removing the front bezel from the server.
Procedures for safely removing the server's top system cover to access internal components.
Detailed steps for safely removing a system cooling fan from its cage.
Procedures for removing a hot-swappable drive from its bay without shutting down the system.
Step-by-step guide for safely removing a system memory module from its socket.
Instructions for removing the expansion card riser assembly from the system board.
Detailed instructions for safely replacing the system's CMOS battery.
Detailed instructions for safely removing the CPU from its socket.
Step-by-step guide for safely installing the CPU into its socket.
Comprehensive steps for safely removing the system board from the chassis.
Identifies and describes the various connectors located on the system board.
Provides steps to clear system and setup passwords using a system board jumper.
Provides the physical dimensions of the server chassis in millimeters and inches.
Lists the types of processors supported by the Dell EMC PowerEdge R240 system.
Details the specifications for the power supply units, including wattage and rating.
Outlines the specifications for system memory modules, including type, capacity, and speed.
General environmental requirements and conditions for system operation, including temperature and humidity.
Explains the meaning of system health and ID indicator lights on the left control panel.
Describes the status indicators for the network interface controller (NIC) ports.
Details the meaning of drive activity and status LEDs on the drive carrier.
Information on performing system hardware diagnostics to identify issues.
Provides instructions and contact information for obtaining Dell technical support.
Explains how to use the Quick Resource Locator (QRL) for system details and documentation.
Links to documentation for system installation and setup procedures.
Links to documentation for system configuration and management tools like iDRAC.
To Next Page