Dell EMC PowerEdge R240 - System Diagnostics and Indicator Codes; System Health and System ID Indicator Codes

System diagnostics and indicator codes
The diagnostic indicators on the system front panel display system status during system startup.
Topics:
• System health and system ID indicator codes
• iDRAC Direct LED indicator codes
• NIC indicator codes
• Non-redundant cabled power supply unit indicator codes
• Drive indicator codes
• PowerEdge R240 system diagnostics
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 81. System health and system ID indicator
Table 34. System health and system ID indicator codes
System health and system ID
indicator code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
8
106 System diagnostics and indicator codes