10. Open the system.
11. Remove the memory risers, cooling fans, and memory riser and fan cage.
12. If your system has four processors, remove all processors except for processor 1 and processor 2.
13. Install the memory riser and fan cage, cooling fans and memory risers.
14. Close the system.
15. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
16. Run the appropriate online diagnostic test.
If the test fails, the processor is faulty.
If the test passes, replace processor 1 and 2 with processor 3 and processor 4. Run the appropriate online
diagnostic test. If the test fails, the processor is faulty.
If a problem is still indicated, see Getting Help.
125
To Next Page
Loading...
