Need help?Do you have a question about the Dell PowerEdge SC1435 and is the answer not in the manual?
General| Form Factor | 2U Rackmount |
|---|---|
| Memory | Up to 32GB DDR2 ECC |
| Network Interface | Dual embedded Broadcom NetXtreme II 5708 Gigabit Ethernet controllers |
| RAID Support | PERC 5/i RAID Controller |
| Management | Dell OpenManage with Baseboard Management Controller (BMC), IPMI 2.0 compliant |
Describes keystrokes for accessing system features during startup, like Setup or Diagnostics.
Details controls, indicators, and connectors on the system's front panel.
Details controls, indicators, and connectors on the system's back panel.
Explains power, NIC, and diagnostic indicator codes for system status.
Lists system messages, their causes, and corrective actions for troubleshooting.
Provides instructions on how to access the system setup utility upon system startup.
Explains how to enter system setup to resolve certain system error messages.
Describes general navigation and options available within the System Setup program.
Details options for configuring system password and security features.
Explains the importance and functionality of system and setup passwords for security.
Lists essential tools required for performing component installation procedures.
Provides step-by-step instructions for safely opening and closing the system cover for access.
Details the procedure for removing and installing the system's power supply unit.
Guides on how to install and remove expansion cards into the system's riser board.
Covers guidelines and procedures for installing and configuring system memory modules (DIMMs).
Explains how to remove and install system processors, including heat sink management.
Details the installation and configuration procedures for SAS or SATA hard drives.
Provides a service-only procedure for removing and installing the system board.
Emphasizes safety precautions and guidelines for working inside the system.
Instructs users to listen and look for indications during the system's start-up process.
Outlines steps to diagnose and resolve issues related to system power.
Provides steps to diagnose and resolve problems related to system memory modules.
Offers solutions for issues related to hard drive recognition or driver errors.
Guides on diagnosing and resolving problems associated with the system's processors.
Explains how to utilize Dell PowerEdge Diagnostics for system problem assessment.
Describes the available testing options within the system diagnostics utility.
Shows the location and settings for configuration jumpers on the system board.
Details the procedure to disable system or setup passwords using a jumper.
Identifies and describes the various connectors found on the system board.
Outlines the steps to follow when seeking technical assistance for system problems.
Lists Dell's online resources and websites for support and information.
Provides important preparation steps and information needed before contacting Dell support.
Lists various methods and resources for contacting Dell customer support.
To Next Page
