Dell PowerEdge T100 - Page 2

Chassis Intrusion Reporting
The System Security screen of the System Setup program has a Chassis
Intrusion Reporting option that is missing from the Hardware Owner’s
Manual. The details are as follows:
• Option: Chassis Intrusion Reporting
•
Description: This field enables/disables the chassis intrusion detection
feature.
When the Chassis Intrusion Reporting option is set to Enabled and the
chassis cover is removed, the field displays DETECTED. Pressing any key will
acknowledge the intrusion, and arm the system to lock for future security
breaches.
When the option is set to Enabled-Silent, the system detects chassis
intrusions but does not display a warning message during startup.
When the option is set to Disabled, the system does not detect or report
chassis intrusions.
____________________
Information in this document is subject to change without notice.
© 2008 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and
Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other
countries. Red Hat and Enterprise Linux are registered trademarks of Red Hat, Inc. in the United States
and other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.