Need help?Do you have a question about the Dell EMC PowerEdge T440 and is the answer not in the manual?
General| ECC | Yes |
|---|---|
| Memory slots | 16x DIMM |
| Internal memory | 16 GB |
| Memory clock speed | 2400 MHz |
| Buffered memory type | Unregistered (unbuffered) |
| Internal memory type | DDR4-SDRAM |
| Maximum internal memory | 512 GB |
| HDD speed | 7200 RPM |
| HDD interface | SATA III |
| Optical drive type | No |
| Supported HDD sizes | 3.5 \ |
| Total storage capacity | 2000 GB |
| Maximum storage capacity | - TB |
| Number of HDDs installed | 1 |
| Number of HDDs supported | 8 |
| Supported RAID controllers | PERC H330 |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet interface type | Gigabit Ethernet |
| USB 2.0 ports quantity | 5 |
| Ethernet LAN (RJ-45) ports | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| Chassis type | Rack (5U) |
| Product color | Black |
| Compatible operating systems | Canonical Ubuntu LTS Citrix XenServer Microsoft Windows Server with Hyper-V Red Hat Enterprise Linux SUSE Linux Enterprise Server VMware ESXi |
| Operating altitude | 0 - 3048 m |
| Non-operating altitude | 0 - 12000 m |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Processor cache | 11 MB |
| Processor model | 4208 |
| Processor frequency | 2.1 GHz |
| Processor manufacturer | Intel |
| Processor boost frequency | 3.2 GHz |
| On-board graphics card model | - |
| Power supply | 750 W |
| Power cable length | 3 m |
| Power cable current | 15 A |
| Power cable connector 1 | NEMA 5-15P |
| Power cable connector 2 | C13 coupler |
| Power supply input voltage | 125 V |
| Data transfer rate | 6 Gbit/s |
Weight and Dimensions| Depth | 573.63 mm |
|---|---|
| Width | 218 mm |
| Height | 443.3 mm |
Information on running system diagnostics before the OS loads.
Details on configuring and accessing the iDRAC remote management controller.
Guide on obtaining and installing system drivers and firmware.
Information on using the Lifecycle Controller for system management.
Details on configuring BIOS settings and viewing system information.
Settings for system passwords, TPM, and secure boot features.
Essential safety warnings and preparation steps before working on the system.
Procedures for installing/removing bezels, feet, wheels, covers, and air shrouds.
Steps for installing/removing drives, blanks, carriers, and adapters.
Steps for removing and installing memory modules.
Steps for removing and installing processors and heat sink modules.
Procedures for installing/removing PSUs, blanks, and power interposer boards.
Steps for removing and installing the system board.
Overview of the embedded system diagnostics tool.
How to run system diagnostics via Boot Manager or Lifecycle Controller.
To Next Page