Dell EMC PowerEdge T440 - Installing the Internal Hard Drive Bay

Figure 42. Removing the internal hard drive bay
Next step
Follow the procedure listed in After working inside your system.
Installing the internal hard drive bay
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Keep the Phillips #2 screwdriver ready.
Steps
1 Align the internal hard-drive bay with the tabs on the chassis and slide the internal hard drive bay into the chassis.
2 Secure the internal hard drive bay to the chassis using the two captive screws.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
93