6. Remove the four screws securing the power distribution board to the chassis.
7. Press the release latch on the power interposer board to release the power interposer board from the hooks on the
power supply unit cage.
8. Lift the power interposer board along with the power distribution board up and out of the chassis.
Figure 56. Removing and Installing the Power Interposer Board and the Power Distribution Board
1. power distribution board
2. slots on power interposer board (4)
3. GPU power connector
4. power interposer board
5. hooks (4)
6. release latch
7. P6 cable connector
8. P1 cable connector
9. P2 cable connector
10. P3 cable connector
11. GPU power connector
12. backplane connector
13. screws (4)
106
To Next Page
Loading...
