50 Preparing Your Systems for Clustering
d
Right-click the root node (storage array name),
Default Group
node,
or
Host Group
node in the
Topology
pane to which you want to add
the host, and select
Define Host
from the pop-up menu.
The
Specify Host Name
window is displayed.
3
In
Host name
, enter an up to 30 character alphanumeric name.
4
Select the relevant option in
Do you plan to use the storage partitions in
the this storage array
, and click
Next
.
The
Specify Host Port Identifiers
window is displayed.
5
Select the relevant option to add a host port identifier to the host, you can
select:
•
Add by selecting a known unsolicited host port identifier
—In
Known
unsolicited host port identifiers
, select the relevant host port
identifier.
•
Add by creating a new host port identifier
—In
New host port
identifier
, enter a 16-character name and an
Alias
for the host port
identifier (up to 30 characters only), and click
Add
.
NOTE: The host port identifier name must contain only the letters A through F.
6
Click
Next
.
The
Specify Host Type
window is displayed.
7
In
Host
type, select the relevant operating system for the host.
The
Host Group Question
window is displayed.
8
Yo u c a n s e l e c t :
•
Yes
—this host shares access to the same virtual disks with other hosts.
•
No
—this host does NOT share access to the same virtual disks with
other hosts.
9
Click
Next
.
If you select
Yes
, the
Specify Host Group
window is displayed. If you
select
No
, go to step 11.
10
Enter the name of the host group or select an existing host group and click
Next
.
The
Preview
window is displayed.
book.book Page 50 Monday, July 25, 2011 3:18 PM
To Next Page
Loading...
