Need help?Do you have a question about the Dell PowerVault MD3800f series and is the answer not in the manual?
General| Form Factor | 2U |
|---|---|
| Drive Types Supported | SAS, SSD |
| RAID Levels Supported | 0, 1, 5, 6, 10 |
| Controllers | Dual controllers |
| Power Supply | Dual redundant power supplies |
| Cooling | Redundant cooling fans |
| Management Software | MD Storage Manager |
| Operating System Compatibility | Windows Server, Linux, VMware |
| Cache per controller | 4GB (upgradeable to 8GB) |
Details the minimum system requirements for hardware and software installation.
Details how to connect the storage array to host servers using controller ports.
Information on setting up Fibre Channel communication between host and storage array.
Steps for configuring Fibre Channel connectivity to a Storage Area Network (SAN).
Explains how Fibre Channel switch zoning enhances SAN security and data throughput.
Details the recommended WWN port zoning technique for SAN configuration.
Lists specific requirements for setting up Fibre Channel switch zoning for the storage array.
Discusses factors influencing storage array cabling configurations.
Provides an example of cabling setup for the Remote Replication premium feature.
Prerequisites for installing HBAs and their associated drivers and settings.
Process overview for upgrading the MD Storage Manager application.
Steps to confirm successful discovery and status of storage arrays.
Guides through essential initial configuration steps for the storage array.
To Next Page