1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
3. Disconnect any telephone, network, and USB cables from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets.
5. Turn over the computer.
6. Remove the battery.
a. Slide the battery-bay release latch on the bottom of the computer toward the back of the computer until the latch is engaged.
b. Grasp the battery by the battery tab and slide the battery horizontally toward the side of the computer.
c. Lift to remove the battery from the bay.
7. Press the power button to ground the system board.
8. Remove any installed ExpressCards, PC Cards, or smart cards from the computer Using Cards.
Back to Contents Page
To Next Page
Loading...
Need help?
General