Dell Precision T3610 - Front Bezel Service; Installing the PSU Card; Removing the Front Bezel

7. Remove the PSU card from the computer.
Installing the PSU Card
1. Replace the PSU card in its slot.
2. Tighten the screws to secure the PSU card in its slot.
3. Connect the power cables to the connectors on the system board.
4. Replace the baffle cover in its slot.
5. Install the cover.
6. Follow the procedures in After Working Inside Your Computer .
Removing the Front Bezel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the cover.
3. Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel.
14