Dell Precision T5500 - Removing the Memory Card Reader; Replacing the Memory Card Reader

Memory Card Reader
DellPrecision™T5500ServiceManual
Removing the Memory Card Reader
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the computer cover.
3. Remove the front bezel.
4. Remove the drives bezel.
5. Disconnect the power and data cables from the back of the memory card reader.
6. Push the sliding plate lever down to release the memory card reader.
7. Remove the memory card reader from the computer.
Replacing the Memory Card Reader
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the computer cover.
3. Remove the front bezel.
4. Remove the drives bezel.
5. Connect the power and data cables to the back of the memory card reader.
6. Push the sliding plate lever down.
7. Place the memory card reader in the computer.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.