Dell Precision T7400 User Manual

10 Quick Reference Guide
Switching From Desktop to Tower Orientation
1 Remove the floppy drive or media card reader (if installed) by following
the steps in "Removing a Floppy Drive or a Media Card Reader (Desktop
Computer)" in your
User’s Guide , and then reinstall the floppy drive or
media card reader by following the steps in "Installing a Floppy Drive or
Media Card Reader (Tower Computer)" in your
User’s Guide .
2 Remove all installed optical drives by following the steps in "Removing an
Optical Drive (Desktop Computer)" in your
User’s Guide , and reinstall the
drives by following the steps in "Installing an Optical Drive (Tower Computer)"
in your
User’s Guide .
Installing Your Computer in an Enclosure
Installing your computer in an enclosure can restrict airflow, can cause your
computer to overheat, and may impact your computer’s performance. Follow
the guidelines below when installing your computer in an enclosure.
NOTICE: The operating temperature specified in this manual reflects the maximum
ambient operating temperature. The ambient room temperature must be a consideration
when installing your computer in an enclosure. For details about your computer’s
specifications, see "Specifications" in your User’s Guide.

Dell Precision T7400 Specifications

General

Chipset	Intel 5400
Power Supply	1000W
Processor	Intel Xeon Dual-Core or Quad-Core
Processor Speed	Up to 3.2 GHz
Memory	Up to 64GB
Memory Type	DDR2 Fully Buffered DIMM ECC
Storage	Up to 1.5 TB SATA or 600 GB SAS
Graphics	NVIDIA Quadro or ATI FirePro
Optical Drive	DVD-ROM, DVD+/-RW
Operating System	Windows Vista, Windows XP, Red Hat Linux
Expansion Slots	2 PCI, 2 PCIe x16, 2 PCIe x8, 1 PCIe x4
Ports	2 serial, 1 parallel, 2 PS/2, audio in/out
Network	Integrated Broadcom 5754 Gigabit Ethernet