Dell Studio XPS 1340 - Media, Wireless, and Power Controls; Media, Wireless, Power Controls

Replacing the Keyboard

1. Replace the keyboard on the palm rest.

2. Align the keyboard shield over the screw holes on the palm rest.

3. Replace the ten screws that secure the keyboard and the shield to the palm rest.

4. Connect the backlit keyboard cable (availability varies according to region) to the connector.

5. Connect the multimedia board cable and power board cable to their connectors.

6. Connect the dual multimedia board/power board cable to the connector.


7. Replace the palm rest (see Replacing the Palm Rest).
Back to Contents Page

3
keyboard shield
4
screws (10)
5
keyboard
6
dual multimedia board/power
board cable connector
7
backlit keyboard cable connector
(availability varies according to region)


NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the
keyboard.