Removing and Installing Parts: Dell XPS 400 Service Manual
file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]
4. Slide the drive release mechanism to the right to release the shoulder screw and slide the drive out to remove it from
the drive bay.
Installing a CD/DVD Drive
1. If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are
installing an IDE drive, configure the drive for the cable select setting.
2. If you are installing a new drive, remove the three shoulder screws from the inside of the drive- panel insert and attach
the screws to the new drive.
To Next Page
Loading...
