To Next PageTo Next PageHow to fix “Add Water” indicator on DELLA Ice Maker?
The “Add Water” indicator on your DELLA Ice Maker lights up when the water level is low. To resolve this, stop the ice maker, add water to the unit, and then press the “Power” button to restart the ice maker.
Why is my DELLA 048-GM-48183 making ice cycle normal but no ice formed?
If your DELLA Ice Maker completes the ice-making cycle but doesn't produce ice, it might be due to high room or water temperature. Ensure the room temperature is between 50°F and 105°F, and the water temperature is between 45°F and 90°F. If the issue persists, a qualified technician should verify the cooling system for refrigerant leaks or blockages in the pipes.
What to do if “Ice” indicator is on DELLA Ice Maker?
The “Ice” indicator on your DELLA Ice Maker illuminates when the ice basket is full. Remove the ice from the basket to allow the ice maker to resume normal operation. If you want the unit to continue making ice despite the indicator, you can continuously press the “Select” button for 5 seconds. This will allow the unit to run for 10 cycles even with the “Ice” indicator on.
Why do ice cubes stick together in DELLA 048-GM-48183 Ice Maker?
If ice cubes from your DELLA Ice Maker are sticking together, it could be because the ice-making cycle is too long or the water temperature in the inner tank is too low. Try stopping the ice maker and restarting it after the ice blocks melt. Also, select the small size ice cube option. If the issue persists, replace the water, ensuring its temperature is between 45°F and 90°F.
Covers essential safety warnings and precautions for operating the appliance, including DANGER/WARNING definitions.
Identifies and describes the main parts and features of the ice maker unit.
Explains the control panel layout, buttons, and indicator lights for operation.
General
