To Next PageTo Next Page
Need help?Do you have a question about the Delmhorst Instrument Co BD-2100 and is the answer not in the manual?
General| Type | Moisture Meter |
|---|---|
| Power Source | 9V battery |
| Warranty | 1 year |
| Weight | 10 oz |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
Explains the purpose and operation of the meter's primary keys (Read, Calibration Check, Scale, Set-Point).
Describes the procedure to check the meter's calibration accuracy and what to do if it's off.
Details how to select and change the meter's measurement scale (Wood, Reference, Gypsum).
Explains how to set a desired threshold value to trigger a buzzer alert for high moisture readings.
Provides information on how readings are stored, accumulated, and display indicators.
Describes how to view stored readings (count, average, highest) and how to erase them.
Details the steps for testing moisture content in wood using the BD-2100 meter.
Explains the link between wood moisture and paint failure, and recommended moisture levels.
Discusses moisture intrusion issues in EIFS and how to test using the meter.
Provides instructions for testing moisture content in gypsum and drywall materials.
Explains how to use the reference scale for materials like concrete, plaster, or masonry.
Details how to test plaster walls for moisture, including surface and sub-surface methods.
Guides on testing concrete slabs for moisture before flooring installation.
Lists important factors influencing concrete moisture testing results, such as slab age and drainage.
Instructions for checking brick or concrete moisture before painting.
Explains how to use the meter to trace the source of leaks in masonry.
Describes how to detect moisture within insulation materials using specific electrodes.
