Need help?Do you have a question about the Delmhorst Instrument Co J-2000 and is the answer not in the manual?
General| Model | J-2000 |
|---|---|
| Manufacturer | Delmhorst Instrument Co |
| Category | Measuring Instruments |
| Type | Moisture Meter |
| Display | Digital LCD |
| Power Source | 9V battery |
| Application | Wood and other materials |
| Measurement Range (Wood) | 6% to 40% |
| Measurement Range (Other Materials) | 0% to 100% relative scale |
| Accuracy | +/- 0.5% |
| Weight | 10 oz |
Explains the operation of the meter's primary keys: Read, Calibration Check, Species, and Temperature.
Guides on verifying meter calibration and troubleshooting low battery or out-of-calibration issues.
Guides on selecting the correct species code for accurate moisture content measurements.
Provides a comprehensive list of species codes for various wood types and their corresponding numbers.
Instructions on setting the wood temperature for accurate readings and switching between F/C modes.
Explains how to adjust pin calibration for insulated vs. non-insulated electrodes for better accuracy.
Step-by-step guide on how to properly take a moisture content reading using the meter's pins.
Explains how readings below 6% and above 40% are displayed and handled in memory.
How to view total readings, average, and highest stored reading, and how to clear memory.
Procedure to reset the meter to its factory default settings and clear all stored readings.
Guidelines for proper storage, battery replacement, cleaning, and maintenance to ensure longevity.
Details the limited warranty for the J-2000 meter and electrodes, exclusions, and limitations.
To Next Page
