What to do if all LEDs on DeLonghi Food Warmer control panel flash?
If all the LEDs on the control panel are flashing, it indicates that the temperature sensor is malfunctioning. In this case, turn off the appliance and contact your dealer.
What to do if DeLonghi Food Warmer leaks liquid?
If the appliance is leaking fluid: * Turn the appliance off and contact your local dealer. * Dry the fluid using rags or absorbent material. * Keep children and pets away from the liquid.
Why is my DeLonghi Food Warmer room staying cold?
If the room stays cold, ensure that the appliance's power is adequate for the room size. Also, if using the appliance for the first time, it may take a couple of hours to heat the room to the desired temperature. Setting the radiator to maximum will not raise the temperature more quickly.
What to do if DeLonghi Food Warmer does not respond to Pilot Wire control unit?
If the appliance does not respond correctly to orders received from the Pilot Wire control unit: 1. Disconnect the appliance from the mains power supply (switch off the mains switch by moving it in the “O” position). 2. Make sure the connection is correct and the control unit is functioning correctly. 3. Contact a qualified professional.
Provides critical safety instructions regarding appliance usage, children, and installation hazards.
Details on mounting, placement, and safety zones for installation.
Instructions for securely attaching the appliance to the wall, including template use.
Covers basic operation, warnings about heat, and placement of materials.
Addresses problems like no heating, continuous heating, and room temperature.
Covers issues like cold rooms, liquid leaks, and control response failures.
General| Brand | DeLonghi |
|---|---|
| Model | Alicante Series |
| Category | Food Warmer |
| Language | English |
To Next Page
