Coffee Maker
fig. 14 fig. 13
5
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
How to choose the flavour of the filter coffee
With the flavour selector, the flavour of the filter coffee can be
selected according to personal taste. By turning the flavour selector
knob (Fig. 8), the coffee maker can be set for coffee with a strong
(STRONG position) or light aftertaste (LIGHT position).
The flavour selector changes the strength of the aftertaste of the
coffee, while the actual taste remains the same.
How to prepare espresso coffee
1. Unscrew the boiler cap by turning it in a anti-clockwise direc-
tion.
2. Fill the small carafe according to the number of cups of espres-
so coffee that are required, using the WATER LEVEL indicators
printed on it (fig. 9) (see the chart page 10).
3. Pour the water into the steam boiler (fig. 10).
4. Replace the boiler cap by turning firmly in a clockwise direc-
tion.
5. Insert the filter for espresso coffee into the filter holder (fig.
11).
6. Fill the filter with the ground coffee, using the measures indicat-
ed in the chart page 10 and level evenly in the filter (without
packing) (fig. 12). It is important to use high quality ground cof-
fee with a medium grind in order to avoid the blocking of the
filter during the brewing.
7. Remove any excess coffee from around the edges of the filter
(fig. 13).
8. To attach the filter holder to the appliance, position it under the
hot water spout with the handle towards the left (fig 14). Push
upwards, and at the same time, turn the handle as far right as
possible. It does not matter if the handle is not centrally aligned
with the machine, as long as the filter holder is firmly attached
to the appliance.
To Next Page
Loading...
