Need help?Do you have a question about the DeLonghi BRAUN KF 9050 and is the answer not in the manual?
General| Type | Filter Coffee Machine |
|---|---|
| Capacity | 10 cups |
| Coffee type | Ground coffee |
| Color | Black |
| Water Level Indicator | Yes |
| Keep Warm Function | Yes |
| Anti-Drip System | Yes |
| Removable Filter Holder | Yes |
| Cord Storage | Yes |
Unloose two Torx 15 screws and four cross screws to dismount the bottom assembly.
Remove four plastic plugs and three cross screws to detach the backplate.
Remove two cable fixers and follow the cable to the PCB to dismount the temp sensor.
Unloose four cross screws to dismount the heater assembly.
Unloose two cross screws and cable fixer to remove the waterpump and silicone tube.
Use a flat, thin screwdriver to lever the knob outwards.
Inside view shows PCB/Cupshelf are easy to dismount; Touchpanel connectors use Poka Yoke.
Remove water tank and use screwdriver to lever out hatch plate.
Lever out caps, then unloose three cross screws from the filter basket.
Remove four cross screws to disassemble the lever mechanism.
Remove six cross screws and be aware of the soldered grounding cable.
The three-way-valve with water inlets/outlets is easy to dismount.
Remove six cross screws and use a wedge to curve plastic cover for Hall Sensor access.
To Next Page
