- 4 -
Operation panel
Operation
Indicator lamp
1.“ ” (Tank full indicator lamp):
It will light when the drainage tank is full or positioned incorrectly.
Empty the water out of the drainage tank, and make sure the tank is
positioned properly.
2. “ ” (Power indicator lamp):
It will light when the unit is plugged in.
3.DEHUMIDIFY mode: Turn the control switch to “ ”. Operation
is continuous ,with the amount of discharged air at the middle level.
4.LAUNDRY mode: Turn the control switch to “ ”. Operation is
continuous,with the amount of discharged air at the high level.This is
appropriate for enhanced dehumidifying,drying clothes or other
items.
5.QUIET mode: Turn the control switch to “ ”. Operation is
continuous,with the amount of discharged air at the low level.This sup-
presses operation noise when dehumidifying ( Under the condition
of high temperature and high humidity,please avoid operating the
unit in QUIET mode,as this can decrease the life of the unit.)
To Next Page
Loading...
