DeLonghi COM53 Series User Manual

14
PROBLEM POSSIBLE CAUSE SOLUTION
The espresso crema is too dark (delivered
from the spout too slowly)
The pre-ground coee is pressed down
too rmly
Press the coee down less rmly (g.
17)
There is too much pre-ground coee Reduce the quantity of pre-ground cof-
fee
The espresso boiler outlet is blocked Clean as described in the section “13.3
Cleaning the boiler outlet”.
The pre-ground coee is too ne or damp Use pre-ground coee for espresso cof-
fee makers only and make sure it is not
too damp
The wrong type of pre-ground coee is
being used
Use a dierent type of pre-ground coee
The lter holder cannot be attached to
the appliance
Too much coee has been placed in the
lter
Use the measuring scoop included and
make sure you are using the correct lter
for the type of preparation
No milk froth is formed when making
cappuccino
Milk not cold enough Always use semi-skimmed milk at refri-
gerator temperature
Milk frother not clean Thoroughly clean the holes in the cap-
puccino maker, in particular those indi-
cated in g. 26-28
Models with adjustable capuccino
sytem (COM532): The ring of capuccino
maker in not in the cappuccino position
Place the ring in the cappuccino position
The drip or espresso has an acid avor Inadequate rinsing after descaling Rinse the appliance as described in the
section ““14.1 Descaling the espresso
coee unit” or “14.2 Descaling the drip
coee unit”
The drip coee takes longer to percolate The drip coee maker needs to be desca-
led
Perform the descaling procedure as de-
scribed in the section “14.2 Descaling
the drip coee unit”
Steam button double ashes Descaling is required for espresso
The steam button is blinking Descaling is in process
The BOLD LED is double ashing Descaling is required for the drip coee
unit
BOLD led blinking Descaling is in process

DeLonghi COM53 Series Specifications

General

Brand	DeLonghi
Model	COM53 Series
Category	Coffee Maker
Language	English