KNOW YOUR COFFEE URN
1) Glass Knob
2) Cover
3) Basket
4) Handle
5) Spring
6) Pump Tube
7) Body
8) Washer
9) Percolation Well
10) Base
11) Cord
12) Base Cover
13) Spreader
14) Coffee Level Indicator
15) Adjustable Thermostat
16) Spigot
17) Panel Plate
18) Power Light
19) Freshness Indicator
20) Freshness Indicator PCB
BEFORE YOUR FIRST USE
Carefully unpack your coffee urn and remove all packaging material. Remove the
hanging label from the coffee urn. The Freshness Indicator label, located on the
base cover of the unit, may safely remain on the coffee urn if so desired. To
remove any dust that may have accumulated during packaging, wash the coffee urn
thoroughly inside and out before using for the first time. (See “Cleaning Your Coffee
Urn” section in this manual).
NOTE: We recommend that prior to percolating your first pot of coffee, you “perc”
cold water only, without ground coffee. This will remove any dust that may have
settled inside the coffee maker.
IMPORTANT: Use cold water only. The automatic percolating system works best
with cold water.
1
2
3
4
5
6
7
8
9
10
11
19
18
17
16
13
12
15
14
20
-3-
To Next Page
Loading...
Need help?
General
