Need help?Do you have a question about the DeLonghi DEGHBG90 and is the answer not in the manual?
General introduction, intended use, and adherence to standards.
Emphasizes user safety, keeping the manual, and manufacturer liability.
Details domestic use, unpacking, damage checks, and protective measures.
Warns against commercial use, modification, and highlights sensitive skin perception.
Covers safe installation, cleaning without power, and avoiding hazards.
Specifies age restrictions and supervision for children using the appliance.
Alerts users that accessible parts become hot during and after operation.
Warns about unattended cooking with oil, fire extinguishing, and hot surfaces.
Prohibits storing items, using as a space heater, or near flammable materials.
Advises on handling cracked hobs, power cable damage, and electrical safety.
Covers protective gear, regulatory compliance, ventilation, and authorized personnel.
Details mains connection, earthing, plug fitting, and wire colour coding.
Explains isolating switches, cable positioning, and replacement procedures.
Defines symbols used in the electrical diagram and notes for DEGHBG70.
Details required clearances around the appliance and provides illustrative figures.
Lists minimum and maximum dimensions for different models.
Specifies ventilation gaps and thermal protection barrier requirements.
Details required clearances above the hob and wall protection measures.
Outlines standards for surface temperatures near the cooktop.
Describes the provided brackets and screws for different models.
Guides users through cutting, gasket application, bracket fixing, and securing.
Details compatibility with Natural Gas/ULPG and required gas pressures.
Guides on connecting gas supply, leak testing, and specific warnings.
Covers testing, flame adjustment, and troubleshooting performance issues.
Provides guidelines for installing flexible gas hoses, including positioning and safety.
Lists injector sizes and gas consumption for Natural Gas and ULPG.
Details the steps for converting the appliance between gas types by replacing injectors.
Explains replacing regulators/adaptors and notes about primary air.
Illustrates different burner types and where injectors are located for replacement.
Guides on adjusting the minimum gas rate setting for optimal flame.
Details the procedure for lubricating stiff gas taps by authorized personnel.
Emphasizes intended use, avoiding combustible materials, and cleaning.
Illustrates the burner configurations for DEGHBG60 and DEGHBG70 models.
Identifies all burner types and shows the layout for DEGHBG90.
Maps each control knob to its corresponding burner function.
Explains how to ignite burners, use controls, and manage flame settings.
Details safety valve function and lighting procedures during power failures.
Provides a step-by-step guide for lighting burners with a flame failure safety device.
Explains the operation and usage modes of the dual burner.
Offers advice on burner selection, saucepan size, flame positioning, and pan stability.
Provides crucial safety instructions for deep fat frying, including fire procedures.
Lists the suitable minimum and maximum pan diameters for each burner type.
Explains how to correctly place the wok stand on the pan-rest for specific burners.
Illustrates the proper and improper ways to use the wok stand and wok.
Warns against using flame tamers or asbestos mats between pan and support.
Advises on central pan placement, avoiding heavy weights, and using correct supports.
Outlines safety measures before cleaning and general cleaning guidelines.
Provides specific instructions and warnings for cleaning the glass hob surface.
Details cleaning for enamelled parts and advice for gas tap faults.
Strongly warns against unauthorized removal of burner plates due to safety risks.
Guides on cleaning burners, electrodes, probes, and ignition plugs.
Details the correct positioning of flame spreaders and caps for various burner types.
Instructions for cleaning pan supports and ensuring correct, level placement.
Explains natural glaze changes around burners due to heat.
Lists checks for ignition failures and burner performance problems.
Details servicing procedures, contact points, and lubricating gas taps.
States that illustrations are indicative and modifications may occur.
Provides the official website for further information and support.
General| Material | Stainless Steel |
|---|---|
| Ignition Type | Automatic |
| Flame Failure Safety Device | Yes |
| Type | Gas |
| Dimensions (WxD) | 510 mm |
To Next Page
