DeLonghi ECAM29043SB - Getting Your Machine Ready; Initial Setup and Priming

6
GET READY
1
3
6
2
4
1
Remove all stickers and
clean all accessories
with warm water and
mild detergent and
dry them. Priming the
machine is only rquired
the rst time out of
the box.
Connect the machine
to the mains socket.
The Water indicator Light
will turn on.
Fill the water tank
with fresh water
Add a large water
container under both
the water/steam spout and
coee spouts. Note, hot
water will be delivered during
the priming process.
The Steam light will
start blinking. Open
the steam dial by turning all
the way to the left (clockwise).
Press the Setting button that
is now blinking and hot water
will be delivered by the water/
Steam spout
Once water delivery
is complete, the steam
light will start blinking again.
Close the steam dial by
turning it all the way to the
right (counterclockwise).
The machine will deliver hot
water from the coee spouts
and stop automatically. The
machine is now primed and
ready for use.
Download the
De’Longhi Coee Link
App to start exploring the
world of De’Longhi Coee
and get informations and tips
about your machine.
2
5
1
3
4
6
5