Do you have a question about the DeLonghi ESAM 3300 and is the answer not in the manual?
Type | Super Automatic Espresso Machine |
---|---|
Weight | 23.1 lbs |
Water Tank Capacity | 60 ounces |
Bean Hopper Capacity | 8.8 ounces |
Pump Pressure | 15 bar |
Voltage | 120 volts |
Adjustable Coffee Spout | Yes |
Removable Water Tank | Yes |
Removable Brew Group | Yes |
Programmable | Yes |
Self-Cleaning | Yes |
Warranty | 1 year |
Milk Frother | Yes |
Power | 1350 W |
Grinder | Conical Burr Grinder |
Technical specifications for coffee brewing components like probes, fuses, and heating elements.
Technical specifications for steam generation components like thermostats, fuses, and heating elements.
Visual representation of electrical component interconnections.
Explanation of microswitch functions and their wiring configurations.
Steps to activate the diagnostic test mode on the machine.
Verifying the up/down movement of the brewing unit motor.
Checking the operation of the coffee grinder and water pump.
Verifying thermoblock operation and indicator lights.
Checking sensor inputs and container detection.
Verifying functions controlled by coffee quantity and water knobs.
Steps to activate the counting mode for non-LCD models.
How to view counts for coffees, descaling, water, and washing.
Understanding LED flashes to interpret visualized data.
Instructions to activate test mode for ESAM Digit models.
Verifying the coffee heating element operation.
Checking the water pump functionality and conditions.
Verifying the coffee grinder motor activation.
Checking the up/down movement of the brew unit motor.
Verifying the operation of the discharge electrovalve.
Checking the steam boiler heating element operation.
Steps to activate the counting mode for ESAM Digit models.
Sequence of displayed data: coffees made, water used, descaling/washing cycles.
Detailed steps for calibrating the coffee grinder mechanism.
Guide on how to adjust the coffee grinder settings for different coarseness levels.
Instructions for correctly inserting the grinder shaft and ring components.