To Next PageTo Next PageWhy my DeLonghi Electric Heater doesn't work?
Your DeLonghi Electric Heater might not be working due to several reasons. First, ensure the heater is properly plugged into a working electrical outlet. Second, the temperature setting may be too low; try increasing it. Finally, check if the Key lock is activated.
What to do if the display shows "Ht" blinking on DeLonghi HSX4315ECA Electric Heater?
If the display of your DeLonghi Electric Heater shows "Ht" blinking, it indicates that the internal temperature is too high. Unplug the heater from the mains. Make sure that the appliance is not covered or obstructed, and remove any obstructions if present. Ensure the heater is correctly positioned, respecting the minimum distance from walls or objects as indicated in the instruction manual. Allow the appliance to cool down, then plug it in again. If the issue persists, please contact De'Longhi customer support.
What to do if DeLonghi HSX4315ECA display shows a blinking dot and I hear a beep?
If your DeLonghi Electric Heater's display shows a blinking dot and you hear a beep, it might be tipped over or improperly positioned. Ensure the appliance is standing upright on a flat surface and is positioned correctly.
General| Power | 1500 W |
|---|---|
| Thermostat | Yes |
| Safety Features | Overheat protection, tip-over switch |
| Anti-frost function | Yes |
| Carry handle(s) | Yes |
| Cord storage | Yes |
| Heat Settings | 3 |
| Heating Method | Oil Filled |
