5
ONCE THE ICE-CREAM IS READY
When the ice-cream is ready, turn the appliance off by placing
the selector in the position.
Remove the lid, the dasher and the cylinder, then use the
scoop provided to transfer the ice-cream to another container.
Then follow the normal ice-cream preparation procedure,
inserting first the cylinder containing the ingredients, then the
dasher and finally the lid.
When the ice-cream is ready, turn the appliance off by placing
the selector in the position, remove the lid and cylinder and
dry the aluminium bottom with a cloth.
CLEANING AND TRANSPORT
Before cleaning, always turn the appliance off by placing
the selector in the position and unplug the appliance
from the mains socket.
Always wash the components of the appliance in direct contact
with the ingredients thoroughly whenever you use the appliance.
Dasher, cylinder and lid can also be washed in the top basket of a
dish washer.
You are recommended to use a short low temperature program-
me.
Dry the bottom of the cylinder thoroughly (fig. 2) before use to
avoid ice forming during ice-cream preparation, thus prolonging
the ice-cream preparation time.
The appliance must not be laid on its side or turned upside
down.
3