6
with a soft brush (g. 3).
• Replace the lter sliding it rmly down from the inside (g.
4).
To clean the kettle and the scale lter
It is vital to clean and descale regularly in order to maintain
good working order. Excessive scale build-up may aect the
performance of the product and shall be avoided.
• Use descaler for kettles (tip: use citric-acid based descaling
solutions).
When limescale starts forming on the heating
element, buy a suitable descaler for kettles and descale
according to the instructions given on the descaler pack.
•
After descaling, boil repeatedly with fresh water and rinse
thoroughly to completely eliminate all residues of descaler
which could damage the appliance. Repeat the boil and
rinse steps for at least three times.
•
If the lter requires descaling, remove and immerse in the
same descaling solution.
•
Make sure electric parts are completely dry before using the
kettle.
3
4
To Next Page
Loading...
