TROUBLE SHOOTING GUIDE
7
The appliance does not work.
The appliance stops during operation.
The selector of the ground coarseness does not
work anymore.
Please make sure the plug is plugged correctly
into the socket and socket works properly
The lid of the coffee bean hopper is not correctly
positioned.
The ground coffee hopper is not correctly positio-
ned or the lid of the ground coffee hopper is not
correctly positioned or is not in place.
The appliance has overheated.
The thermal fuse of the motor released.
You have to contact an approved service center.
Causes of overheating to be avoided:
The maximum capacity of bean hopper, or the ma-
ximum capacity of ground coffee in the ground
coffee container has been exceeded.
Check the upper burr is correctly positioned. (see
maintenance section above).
PROBLEM
CAUSE/SOLUTION
To Next Page
Loading...
