To Next PageTo Next PageWhat to do if all coffee buttons and all milk recipe buttons flash alternatively on DeLonghi Coffee Maker?
If all coffee buttons and all milk recipe buttons flash alternatively on your DeLonghi Coffee Maker, this indicates the machine is overheating. Allow the appliance to cool down. Note that it will be blocked for approximately 10 minutes after emptying.
General| Brand | DeLonghi |
|---|---|
| Model | EN560 |
| Type | Espresso Machine |
| Pressure | 19 bar |
| Automatic Shut-off | Yes |
| Compatible Capsules | Nespresso Capsules |
| Power | 1400 W |
| Weight | 4.5 kg |
Lists machines with/without Rapid Cappuccino System and their components.
Describes tactile buttons for drinks and system alerts (Descaling, Clean).
Explains R.C.S. components like lid, milk froth density, and spout.
Explains important symbols like caution, danger, and hot surfaces.
Covers safe household use, child supervision, and operation by persons with reduced capabilities.
Details risks of electric shock, proper connection, and fire hazards.
Lists all items included in the coffee machine box, such as the machine and manuals.
Step-by-step guide for unpacking, removing films, and connecting power.
Instructions for rinsing the water tank and switching on the machine for the first time.
Explains how to interpret indicators for power off and water hardness settings.
Details the rinsing process and cleaning of the Rapid Cappuccino System.
Guides on inserting capsules, placing cups, and starting coffee brewing.
Instructions on how to remove the used capsule after brewing.
Step-by-step removal of R.C.S. parts like the milk container lid and spout.
Instructions for filling the milk container and connecting the R.C.S. to the machine.
Details the machine's heating phase and inserting the capsule for milk drinks.
Provides information on milk type and specific drink preparation.
Guides on placing the cup and adjusting the milk spout for optimal frothing.
Explains how to adjust the milk froth regulator and recommended settings.
Details pressing the drink button and the 'CLEAN' light indication.
Instructions on how to rinse the milk system after each use.
Describes the automatic stop of the rinsing process and the 'CLEAN' alert.
Instructions for disconnecting the R.C.S. and storing it in the refrigerator.
Guidelines for cleaning R.C.S. components and caution on milk storage duration.
Steps to enter the mode by pressing and holding buttons for 3 seconds.
How to release the button when the desired volume is reached.
Explains how the new volume is stored and confirmed by button blinking.
Refers to factory settings for min/max quantities and preparation steps.
How to enter programming mode for milk drinks by holding buttons.
Releasing the button when the desired froth volume is achieved.
Steps to set the coffee volume for milk-based recipes.
Factors affecting milk froth volume and recipe sequence notes.
Instructions for cleaning the machine exterior using mild agents and damp cloths.
Steps for emptying and rinsing the drip tray, capsule container, and water tank.
Details on disassembling the R.C.S. and rinsing parts with warm water.
Soaking R.C.S. parts in detergent water and cleaning the milk tank.
Drying all parts and reassembling the R.C.S. components.
Pressing the 'Clean' button before preparing milk drinks after reassembly.
Steps to enter the menu mode by pressing specific buttons simultaneously.
Information on how the menu mode exits automatically or manually.
Performing a continuous button press sequence to restore settings.
Confirming the reset and exiting the menu mode.
Lists default settings and cautions for high coffee volumes to prevent overheating.
Recommendations for Espresso/Lungo settings and ranges for milk/coffee volumes.
Explains descaling alerts, their importance, and LED blink speeds.
Steps to start descaling, including preparing the machine and water tank.
Instructions for connecting the descaling pipe to the machine's steam connector.
Machine enters descaling mode; descaler flows through outlets.
Positioning a container for the descaling liquid.
Pressing the warm milk froth button to start the descaling flow.
What happens when the cycle finishes (tank empty, button lights up).
Steps to rinse the machine after descaling, including refilling the water tank.
Final step of cleaning the machine with a damp cloth.
Instructions on using the test strip and interpreting the results.
Steps to enter the menu, remove milk jug, and press buttons to access settings.
How to select the level and confirm the setting.
How the menu exits automatically or manually.
Steps to turn on the machine, remove the milk jug, and enter the emptying menu.
Removing the water tank, ejecting capsules, and placing a container.
Choosing the sequence and starting the emptying process.
Information about automatic shutdown and machine blockage after emptying.
Steps to activate the menu by pressing specific buttons.
How to choose the desired auto power off duration and confirm it.
Information on menu exit and how current settings are displayed.
Table showing default auto power off times for different drinks.
Lists the model name and electrical specifications (voltage, power).
Details maximum pressure, weight, and tank capacities.
Provides the height, width, and depth of the machine.
Guidance on recycling valuable materials and contacting local authorities.
How to get additional information, help with problems, or seek advice.
Details the 2-year warranty period against material and workmanship defects.
Outlines conditions under which the warranty does not apply, such as misuse or accidents.
