Why do Espresso and Lungo buttons flash on my DeLonghi Coffee Maker?
If the Espresso and Lungo buttons on your DeLonghi Coffee Maker flash quickly, it could be due to a blocked pump or lack of water, or a blocked or defective flowmeter or flowmeter lead. Check the electrical connections to the PCB power board and replace the pump if necessary. Also, clean and/or replace the flowmeter or flowmeter lead to resolve the issue.
What to do if Espresso, Lungo, Latte buttons flash on DeLonghi Nespresso Lattissima One?
If the Espresso, Lungo, and Latte buttons on your DeLonghi Coffee Maker are flashing alternately, it indicates an overheating alarm for the generator or coffee boiler. To resolve this, allow the machine to cool down completely before attempting to use it again.
How to fix all buttons and LEDs flashing on DeLonghi Nespresso Lattissima One Coffee Maker?
If all the buttons and LEDs on your DeLonghi Coffee Maker flash simultaneously three times immediately after switching it on, it indicates a general alarm. You should check the NTC and replace it if necessary.
What to do if all buttons and LEDs flash on DeLonghi Coffee Maker after 1 minute?
If all the buttons and LEDs on your DeLonghi Coffee Maker flash simultaneously three times, one minute after switching it on, you should check the TCO and the boiler resistances and replace if necessary.
General| Pump Pressure | 19 bar |
|---|---|
| Used Capsule Container Capacity | 9 capsules |
| Heating Time | 25 seconds |
| Brand | DeLonghi |
| Model | Lattissima One |
| Category | Coffee Maker |
| Type | Espresso Machine |
| Color | White |
Provides essential safety precautions for using the appliance to prevent injury.
Details electrical safety measures, including plug and cord handling.
Covers precautions related to appliance placement, usage, and maintenance.
Step-by-step guide on how to prepare a standard coffee drink.
Step-by-step instructions for preparing milk-based coffee beverages.
Explains the different alert indicators related to descaling needs.
Detailed steps for performing the descaling process on the machine.
Solutions for issues like no lights, no coffee/water, slow dispensing, or capsule problems.
Addresses blinking lights, button behavior, and alerts indicating machine status.
Solutions for problems related to milk froth quality and lever closure.
To Next Page
