13
ENGLISH
Operation
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS… ….WHAT SHOULD YOU DO?
HH PP
HIGH PRESSURE
Insert and re-insert the plug. If the problem persists, call the service
centre.
LOW TEMPERATURE
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
FF FF
FAN FAILURE
PP FF
PROBE FAILURE
If either of these messages appears, call the service centre.
FULL TANK
Empty the tank at the rear of the appliance and reposition
correctly.
To Next Page
Loading...
