24
THE LEDS
These lights turn on depending on the operation selected or to indicate breakdowns.
BUTTONS AND INDICATORS ON THE INTERNAL UNIT
FUNCTION RED LED YELLOW LED GREEN LED
OFF (1)
off off off
AIR-CONDITIONING
off off on
DEHUMIDIFYING
on off on
FULL AUTO (2)
***
VENTILATION
off on off
DIRTY FILTERS (3)
off blinking off
ALARM (4)
blinking blinking blinking
(1) The three leds stay lighted even with the appliance turned off if at least one of the TIMER functions
has been set.
(2) (*) As soon as this operation is selected, all the leds will stay on for several seconds until the controls
have decided how to run (air-conditioning, dehumidifying or ventilation).
(3) This warning light serves to remind you that it is necessary to periodically clean the air filters.
Check therefore that the filters are clean. Then, in order to extinguish the warning light, press the
by-pass button for about 6 seconds until you hear a beep and then a double beep.
(4) The alarm messages indicated with these lights are of various types. In order to determine the prob-
lem it is advisable to consult an authorized service center.
FORCED OPERATIONS
This is a way of operating to be selected if there are problems with the remote control (broken or lost, or
the batteries run-down).
Push the button to start the unit and then press it again to get the sequence of the different operational pro-
cedures (air-conditioning, dehumidifying, ventilation, full auto, turn off) with an automatic setting.
FORCED
OPERATION
BUTTON
GREEN LED YELLOW LED RED LED
SIGNAL RECEIVER
To Next Page
Loading...
