DeLonghi Vacuum cleaner - Assembly Instructions; Connecting the Hose; Telescopic Extension Adjustment; Tool Holder Attachment

13
ASSEMBLY INSTRUCTIONS
Always unplug from the mains before attaching or removing tools.
Fitting the tools
Insert the flexible hose in the coupling on the
appliance, press the lateral fixing levers and
push as far as it will go (Fig.1).
To remove the hose, press the lateral fixing
levers and pull the hose out.
Fig. 1
Telescopic extension
Connect the telescopic extension to the end of
the hose handgrip.
After attaching the telescopic extension to the
handgrip, rotate the inner tube towards the right
and pull out to the required length (fig. 2). To
fix, rotate the tube to the left.
Now fit the chosen tool to the other end of the
extension.
N.B: All vacuuming tools can be connected
either directly to the hose handgrip or to
the telescopic extension
1
2
Fig. 2
Fig. 3
Tool holder (Fig. 3)
The tool holder on your appliance enables you
to keep the smallest tools close at hand. After
attaching the tools to the tool holder, hook the
tool holder to the hose near the handgrip.