DeLonghi WF1500E - Problem Cause Solution

17
PROBLEM CAUSE SOLUTION
• The vacuum cleaner does not
start
• The suction power reduces
and the noise increases
•Water is released during wet
vacuuming
• No power
• The maximum level of water
collection has been reached
• Nozzle, hose or telescopic
tube blocked.
• Float blocked and/or no float
filter (
U).
•Check the power cord, plug
and outlet
•Press the ON/OFF button,
disconnect the power cord
from the mains power supply
and empty the water
collection tank (
H)
• Check that the nozzles, the
vacuum hose or telescopic tube
are not blocked and remove
any causes of blockage.
• Release the float, clean
and/or dry, as required, the
foam filter