Installing the software
From the DVD menu click on « PC -
SW »
Click on Diagnostic SW Install (Ensure
your dongle is fitted on a USB port at
this point)
Select the installation language
(doesn’t determine the display
language of the software)
The current subscribed licenses are
shown, check they are correct and
click Next
Internet connection is required for
activation. It won’t be possible to go
further without internet connection
The Licence Activation Tool runs, click
start to activate your license
Select the product you wish to install
« DS Cars » or « DS Heavy duty ». If
both are required the installation must
be performed twice (one for each)
Check that System requirements match
computer configuration, tick the
checkbox and click Next
Select the desired folder, click install
and wait for the installation to
complete. It is recommended not to
change the destination folder.
Congratulations on the purchase of your new Delphi DS150e Diagnostic system!
x.x.x.x
231
456
789
DS150e
Quick Start Guide
delphiautoparts.com
Air Conditioning | Braking | Diagnostics | Diesel | Engine Management | Fuel | Ignition | Maintenance | Steering & Suspension
1 / 2
©2015 Delphi Automotive PLC. All rights reserved.
DDGX236(EN)
To Next Page
Need help?
General
