Delphi Skyfi 2 User Manual

11
Basic Operations
Direct Entry
1. Press the “preset/direct” button
until the “DIRECT” icon appears in
the display.
2. Press the number keys correspond-
ing to the channel number. For
example, for channel 31, press
“3” followed by “1.” You can
select the channel faster by
pressing the “XM” button after
entering the channel number.
Using Presets
There are 30 presets in all: Each bank
(A, B, and C) holds 10 presets. Press
the “preset/direct” button to select
the proper bank. Use these banks to
organize your favorite channels or
to create separate preset banks for
additional users to enjoy.
To set a channel preset:
1. Tune to the desired channel.
2. Press the “preset/direct” button
until the appropriate “Preset” icon
(preset bank A, B, or C) appears in
the display.
3. Press and hold the number key
that corresponds to the preset you
would like to set. SKYFi2 beeps
when the channel is stored.
To select a stored preset:
1. Press the “preset/direct” button
until the appropriate “Preset” icon
(preset bank A, B, or C) appears in
the display.
2. Press one of the number keys.
SKYFi2 will tune to that channel.
Note: If a number key is pressed that has
not been assigned to a favorite channel,
SKYFi2 will automatically tune to channel 1
or the XM Preview channel, reminding you
to make a selection.

Delphi Skyfi 2 Specifications

General

Brand	Delphi
Model	Skyfi 2
Category	Car Receiver
Language	English