From Step 2
Desde el paso 2
Right Side x 1
Lado derecho x 1
B
SECTION 1: CHANGING TABLE ASSEMBLY, STEP 3
SECCIÓN 1: ARMADO DEL CAMBIADOR, PASO 3
12
Parts and tools required to complete step
Piezas y herramientas necesarias para completar este paso
Attach the Right Side (Part B) to the
assembly from step 2 with (6) M6x40
mm Bolts (Part J) using the M4 Allen
Wrench as shown.
Fije el Lado Derecho (Pieza B) a la
pieza del paso 2 utilizando (6)
Pernos M6x40mm (Pieza J). Utilice
la Llave Allen M4 para el proceso
de apriete.
M4 Allen Wrench (included)
Llave Allen M4 (incluido)
J
M6 x 40 mm Bolt x 6
Perno M6 x 40 mm x 6