Need help?Do you have a question about the DELTA DORE CS 8000 TYXAL + and is the answer not in the manual?
General| Type | Wireless Alarm System |
|---|---|
| Installation | Wall-mounted |
| Operating temperature | -10°C to +40°C |
| Compatibility | TYXAL+ |
| Communication | Radio |
| Zones | 8 zones |
| Radio range | Up to 300 m in free field |
| Communication Module | GSM (optional) |
| Siren Output | Yes |
| Remote Control | Yes |
Describes the security feature protecting against unauthorized opening or removal.
Details the types and usage of access codes for system control.
Explains how to manage and configure different zones within the system.
Provides guidelines for choosing an optimal installation location.
Details the steps for mounting the alarm control unit.
Details the procedure for adding new devices to the system.
Guides the association of various alarm system products.
Step-by-step guide to creating/changing codes via installer code.
Covers various settings to customize the alarm system.
Guides on automating system operations with weekly schedules.
Programming phone numbers for alarm notifications.
Configuring the system for remote monitoring center communication.
Assigning detectors and codes to specific system zones.
Testing specific types of intrusion detectors.
Specific testing procedure for the DMBV video motion detector.
Testing sirens and transmitters.
Testing specific technical detectors like impact or leak detectors.
Performing tests under real-world conditions.
Initial system activation without a touch screen keypad.
Entering and exiting maintenance mode using alternative devices.
Steps to enter maintenance mode with different control devices.
Procedures to exit maintenance mode using different control devices.
Adding products to the system without a touch screen keypad.
Initial step to switch the control unit to maintenance mode.
Setting the control unit to add new products.
Final step to confirm product association.
Exiting the product addition mode.
Managing access codes without a touch screen keypad.
Steps to create a new user access code.
Managing zones for system configuration.
Assigning products to zones using a simple keypad.
Assigning products to zones using a remote control.
Assigning products to zones using a badge reader.
Procedures for testing the alarm system installation.
Testing specific types of detectors.
Testing sirens and transmitters.
How to locally activate or deactivate individual system products.
Setting the type of control system the keypad will manage.
Linking the keypad to a specific control system.
Steps to integrate the video function with the alarm system.
To Next Page
