Delta Electronics CTA4 User Manual

CTA USER MANUAL
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED - 3 - 2007-05-09
N
OTES
How to use CTA correctly…
 To avoid misaction caused by interference, please make sure if you isolate the I/O wiring when I/O
wiring and power cable or high-voltage cable in the same wiring tube. If possible, use a separate tube
for the I/O wiring.
 Make sure that you place the sensor, other input devices, signal cables and CTA away from the
interference source.
 It will require 200ms after CTA is switched on for the activation of the internal power and default
value reset. CTA may not operate normally during this period of time.

Delta Electronics CTA4 Specifications

General

Brand	Delta Electronics
Model	CTA4
Category	Measuring Instruments
Language	English